Ironing table for lingerie with heating and suction Comes with: One or two swivel arms and bucks, eco swivel bow, silicone iron rest pad, kicker plate and chimney.
Rectangular ironing table with heated steam, vacuum and steaming board Comes with: Swivel bow, silicone iron rest pad and kicker plate. Extra accessories: Swivel arm, buck, Vario system, lighting system, iron gantry, steam iron, automation with two timers and inclined table top garment frame.
Ironing table with heated steam, vacuum and steaming board Comes with: Swivel bow, silicone iron rest pad, spill tray and kicker plate. Extra accessories: Swivel arm, buck, Vario system, lighting system, iron gantry and steam iron.
Finishing table for trousers with heating and adjustable suction & blowing Comes with: FTU Ø120 mm buck with trouser holder, ATB swivel bow, silicone iron rest pad, chimney, kicker plate and wheels for easy drive. Extra accessories: Different bucks Ø120 mm, BS base and K/6/2 condenser, Vario system, lighting system, iron gantry and steam iron.
Special seam opening ironing table for 3 trouser seams with heating and adjustable suction & blowing Comes with: FP-N buck with trouser stretching chains, ATB swivel bow, chimney, silicone iron rest pad, wheels for easy drive. Extra accessories: BS base and K/6/2 condenser, Vario system, lighting system, iron gantry and steam iron.
Special seam opening ironing table for 5 jacket seams with heating and adjustable suction Comes with: Standard FJ mounted buck, ATB swivel bow, silicone iron rest pad, chimney, wheels for easy drive, side base with separate pedal and F14 shoulder buck. Extra accessories: BS base and K/6/2 condenser, Vario system, lighting system, iron gantry and steam iron.
Special sleeve seam opening table with heating and adjustable suction & blowing Comes with: F/INS Ø120 mm buck, ATB swivel bow, silicone iron rest pad, chimney, kicker plate and wheels for easy drive. Extra accessories: Different bucks Ø120 mm, BS base and K/6/2 consender, Vario system, lighting system, iron gantry and steam iron.
Special sleeve seam opening table with heating and adjustable suction & blowing Comes with: F/INS Ø120 mm buck, ATB swivel bow, silicone iron rest pad, chimney, kicker plate and wheels for easy drive. Extra accessories: Different bucks Ø120 mm, BS base and K/6/2 consender, Vario system, lighting system, iron gantry and steam iron.
Lining ironing table with heating and adjustable suction & blowing Comes with: Standard FHLN-S Ø120 mm buck, ATB swivel bow, silicone iron rest pad, chimney, kicker plate, wheels for easy drive, side stand with F15 shoulder buck Ø85 mm. Extra accessories: Different bucks Ø120 mm and Ø85 mm, water spraying system, longer spill tray, steam iron.
Finishing table with heating and adjustable suction & blowing Comes with: Standard FS-S Ø120 mm buck, ATB swivel bow, silicone iron rest pad, chimney, kicker plate and wheels for easy transport. Extra accessories: Different bucks Ø120 mm, swivel arm with different bucks Ø85 mm, BS base and K/6/2 condenser, swivel tube for support of hangers, longer spill tray and steam…
Finishing table with heating and adjustable suction & blowing Comes with: Standard FS-L Ø120mm buck, 3 Swivel arms with buck F1/C, F17 and F26, ATB swivel bow, silicone iron rest, suction regulator with 0-100% indicator, telescopic swivel arm support for hanger and extra foot pedals.
Compact ironing table Comes with: All five swivel arms, automatic trasition of suction from the working surface to the swivel arm and vice versa, suction regulator with 0-100% indicator, low foot pedal voltage 24 V, ATB swivel bow, silicone ironing mat and adjustable height with stabilizer. Extra accessories: Different bucks that can been chosen, depending on the usage, water spraying…
Ironing table with heating, adjustable suction and blowing by a lever with 0-100% suction indicator Comes with: ATB swivel bow, silicone iron rest pad, kicker plate, chimney and wheels for easy drive. Extra accessories: Swivel arm, buck, Vario system, lighting system, iron gantry and steam iron.
Ironing table with heating, adjustable suction and blowing Comes with: ATB swivel bow, silicone iron rest, kicker plate, chimney and wheels for easy drive. Extra accessories: Swivel arm, buck, Vario system, lighting system, steam iron and iron gantry.
Ironing table with heating and suction Comes with: Eco swivel bow, silicone iron rest pad, kicker plate and chimney. Extra accessories: Swivel arm, buck, Vario system, lighting system, steam iron and and iron gantry.
Ironing table with heating, adjustable suction and blowing by a lever with 0-100% suction indicator Comes with: ATB swivel bow, silicone iron rest pad, metallic spill tray, chimney, kicker plate, wheels for easy drive. Extra accessories: Swivel arm, buck, spotting swivel arm with stainless steel buck and a collecting tank for the spotting agent, air gun, Vario system, steam iron,…
Ironing table with heating, adjustable suction and blowing by a lever with 0-100% suction indicator Comes with: ATB swivel bow, silicone iron rest pad, kicker plate, chimney and wheels for easy drive. Extra accessories: Swivel arm, buck, Vario system, lighting system, steam iron and iron gantry.
Form finisher with or without boiler and standard frame height 130cm Available in 2 models: <ul> &amp;amp;lt;ul></li></li> FIN 1 Form Finisher t</li&gt;</li><li class="yoast-text-mark">style="list-style-type: none;">o be connected to central steam & lt;li>FIN 3 Fo rm Finisher with built-in el ectric boiler</li > Extra acessories: Maximum frame 140cm. Maximum frame 120cm.
Industrial form finisher for jackets and shirts with automatic and pneumatic function & height of the puppet at 130cm Suitable for finishing jackets, coats, raincoats, shirts etc. Extra acessories: Complete water spraying system with spraying gun. Maximum frame 145cm.
Special ironing table for curtains with suction and heating Table specially designed for easy and productive ironing of curtains, sheets and large pieces of fabric.
Ironing table specially designed for curtains with rolling ironing surface Moto Deco 3000 is a solid modern construction, ergonomically designed for quality ironing and shorter ironing time.
2-in-1 Hose system A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering. Tuffram finish iron sole A Non Stick PTFE injected Iron sole makes smooth and easy ironing with long life. Three-dimensional curved iron sole The irons especially for final pressing…
Electrical Heated Steam Hose with solenoid valve Light Touch for Steaming Lighter Weight & Precise temperature control No condensation even at low temperature
Excellent balance and light weight Molded Urethane handle Light Touch Switch and steam volume adjustment Electronic temperature controll and flush temperature dial Heat or shield improve non woven nomex material protects the hand from heatup to 280C No More Steam Leaks , easy Cleaning , Easy Water Refill
TEMPERATURE CONTROL Liquid sensor thermostat has a precision and accurate control. BOTTLE No need for Steam Generator. Ironing work can be started at any place without difficulties. HEAT SHIELD Improved non-woven Nomex material protects the hand from heat up to 280°C. OPEN END HANDLE The open end design gives excellent visibility for ironing into tight areas, inside cuffs or pockets,…
Automatic belt warping prevention device. The Upper belt warping prevention system adopts a direct limit switch type like the lower belt warping prevention system. Increased the fusing belt width to 450mm. Adopted rubber driving rollers for non-slip driving. MS MODEL has been equipped with a rotary strip-off device as standard.
Automatic universal steam press with air function Suitable for jackets, trousers and shirts. There is a safety protector guard against accidental hand crushing.
Automatic universal steam press with air function Suitable for jackets, trousers and shirts. There is a safety protector guard against accidental hand crushing.
10 Bar High Pressure Steam Generator for Continuous Operation Available in 3 models. Electronically controlled by a PCB, with a water level control system by one electrode. Suitable for garment industries.
6 Bar High Pressure Electric Steam Generators The electric steam generators "SG" are designed for usage in connection with a steam line for steam consumers such as steam irons, steam presses, finishers, toppers e.t.c.
6 bar high pressure electric steam generator The electric steam generator SG 15 is designed for usage in connection with a steam line for 4-7 steam consumers such as steam irons, steam presses, finishers toppers e.t.c.
Industrial electric steam generator for continuous operation Available in 6 models based on the different power supplies (from 2.5 to 6 kW). Electronically controlled by a PCB and with a water level control system by one electrode. Different connections for one, two or three steam irons. Suitable for the garment industry, dry cleaners, tailor shops and ateliers.
Industrial electric steam generator for continuous operation Available in 6 models based on different power supplies (from 2.5 to 6 kW). Electronically controlled by a PCB and with a water level control system by one electrode. Different connections for one, two or three steam irons. Suitable for the garment industry, dry cleaners, tailor shops and ateliers.
Manual heat transfer press The manually operated heat press TRF 5040 with dimensions 50x40 cm is easy to use on flat surfaces (ready-made clothes, T-shirts). It will fully compensate you with the quality of pressing and its lifespan.
Automatic fusing air press with support table Suitable for fusing jackets' parts such as sides, lapels and trousers' waist band area. Automatic top plate that opens and closes with two buttons.
Manual fusing press with support table Suitable for fusing jackets, parts such as sides, lapels, collars, cuffs and trousers' waist band area. Manual top plate that opens and closes with a lever.
Ironing table with heating, suction, blowing and adjustable height Comes with: Electrical blowing, silicone iron rest pad, wheels for easy drive, double pedal and standard support base for Magic Inox or Atmos. Extra accessories: Swivel arm and F1 buck.
Ironing table with heating, adjustable suction and blowing by a lever Available in 2 models: Heating and suction (Flex DOB) Heating and automatic suction/blowing transition by two foot pedals (Flex DOB S+B) Comes with: ATB swivel bow, silicone iron rest pad, spill tray, kicker plate, chimney and wheels for easy drive. Extra accessories: Swivel arm, buck, Vario system, lighting system, steam iron…
Ironing table with heating, suction and blowing Available in 2 models: Heating and suction (Eco DOB) Heating, suction and blowing (Eco DOB S+B) Comes with: Eco swivel bow, silicone iron rest pad, spill tray, kicker plate and chimney. Extra accessories: Swivel arm, buck, Vario system, iron gantry, steam iron, lighting system.
Ironing table with heating, suction and blowing Available in 2 models: Heating and suction (Tailor) Heating, suction and blowing (Tailor S+B) Comes with: Swivel bow, silicone iron rest pad, spill tray, kicker plate and stadard support base for Magic Inox or Atmos. Extra accessories׃ Swivel arm, sleeve buck without heating, hanger holder, finisher, steam boiler with steam iron.
Industrial electric steam generator for continuous operation Available in 6 models based on the different power supplies (from 2.5 to 6 kW). Electronically controlled by a PCB with an electronic keyboard, automatic fault detection system, and water level control system by three electrodes. Different connections for one, two or three steams irons. Suitable for the garment industry, dry cleaners, tailor…
Automatic electric steam generator 5 L for one iron Steam Tech 1500 is designed with an innovative and smart solution for Automatic or Manual water filling activated by a single switch. Suitable for dry cleaners, tailors and ateliers. Comes with: Swivel bow, silicone iron rest pad, wheels for easy drive and a 18 L water tank Extra accessories: Steam iron…
Steam generator 5 L with one steam iron Available in 2 models: Plain With a wheel driven trolley If you already own the plain Atmos steam generator, you can easily adjust the wheel driven trolley. Comes with: Swivel bow, silicon iron rest pad and steam iron. Extra accessories: Steam brush, steam gun and trolley base.
White foldable ironing board with vacuum and heating options, adjustable height, without boiler, with maxi extractor (also available in chrome version)
Automatic fusing air press with support table Suitable for fusing jackets’ parts such as sides, lapels and trousers’ waist band area. Automatic top plate that opens and closes with two buttons.
The Hashima HP-900LF / HP-900LFS is a straight linear fusing press. Featuring continuous type operation, automatic belt warping prevention and feed back system.
