Juki LK-1900C, Computer-controlled, High-speed, Bartacking Sewing System
World’s highest class sewing speed of 3,300 sti/min!
Established computer-controlled bartacking machine is now further evolved.
Inspire the Knowledge in Sewing Adjustment
Epoch-making Sewing Systems in history
Description
Higher productivity
The LK-1900C has achieved the maximum sewing speed of 3,300 sti/min. The new mechanism contributes to increased rigidity of the machine driving section. In addition, greater speed is achieved through the reviewing of the lubrication System. The LK-1900CW (with a 1.8-fold capacity hook) runs at a speed of 3,000 sti/min.
Easier alignment of sewing positions
The “built-in LED marking light” facilitates positioning of bartacking to reduce unnecessary operation for placing the fabric. The irradiation width of the marking light is adjustable.
Some types of the work clamp foot may hide the irradiated light.
Standard LCD panel / Control box integrated with the machine head
The control box integrated with the machine head, originally designed by JUKI, is adopted. The number of standard patterns is 100. As many as 999 patterns (500,000 stitches) can be stored in memory. The new upright type operation panel is installed on the side face of the machine head to allow the operator to operate the machine without averting his/her eyes, during sewing, from the bartack being sewn. In addition, the table surface can be used widely. The operation panel can also be installed on the table as before.
If you want to install the operation panel on the table, an optional connecting cable (1.6 m)will be necessary. Part number: 40297363
Movable eye guard device (optional)
The movable eye guard device protects eyes only during sewing. When the sewing machine is at rest, the eye guard automatically goes up to provide a clear view of the needle entry area, thereby allowing the operator to place the fabric smoothly.
Movable eye guard kit: Part number 40297869
Two-way data communication function for sewing machine data using an NFC terminal (optional)
The standard LCD panel is provided as standard with a USBport to facilitate data management between sewing machines and update of software. If you additionally use the optional NFC terminal, bidirectional data communication is enabled with a commercially-available Android terminal in a non-contact manner. This enables quick sharing of pre-set sewing data with other sewing machines to reduce the time required for set-up changing.
Optional NFC terminal: Part number 40289481
