Juki LS-1340 Series Cylinder-bed, 1-needle, Unison-feed, Lockstitch Machine
1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Hook
The slimmed-down throat plate easily adjusts to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the compound feed machine’s ability to smoothly sew not only bags and shoes but also small articles such as wallets. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.
Description
Sewing capabilities and feed performance that respond to a broad range of uses in the sewing of heavy materials
With its larger needle bar stroke, a larger lift of the presser foot, and newly adopted double-tension mechanism, the walking foot machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials. * The LS-1340 is provided with a single-tension mechanism.
Rectangular feed
Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches.
Alternating vertical movement mechanism
The ratio of alternate vertical movement remains unchanged even when the material thickness changes.
Excellent for the sewing of sharp curves
The slimmed-down throat plate easily responds to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the machine’s ability to smoothly sew not only bags and shoes but also small articles such as wallets.
Gauge for small articles are provided as standard
The throat plate and feed dog are provided with a gauge that offers an excellent capability for the sewing of sharp curves. These gauges are especially useful for the sewing of curves of bags and leather cases.
The vertical stroke of the walking foot and presser foot can be easily set and change (LS-1342, LS-1342-7)
Operators adjust the vertical stroke of the presser and walking foot using the top dial. The machine automatically sets sewing speed for optimal performance
The machine is provided as standard with an instantaneous change-over device for the alternate vertical movement amount (DL device)
For sewing processes involving heavy or multi-layered materials, the machine sets the alternating vertical movement of the walking foot and presser foot to maximum by pressing the DL switch. The result is beautiful seams free from gathered stitches. The machine is provided with both a hand switch and a knee switch.
A helpful automatic reverse feed function is provided as standard
With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated.
Thread trimming without fail
The machine handles thread counts from #30 to #5. Its highly rigid thread trimming mechanism cuts the thread without fail. Machine supports a wide range of sewing processes, including bag sewing.
Excellent operability and maintainability
The underside of the top end of the cylinder-bed is provided with an easy-to-remove cover. This promises easy cleaning of thread wastes. The stitch length can be easily selected by the stitch dial. The machine’s enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel (φ160mm). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. The machine’s full-open-type top design makes adjusting works easier. The machine comes with a lubricating mechanism that uses a centralized oil wick. This substantially reduces the time and trouble required for oiling the machine. (The hook needs manual oiling with an oiler. The machine arm integrates a walking foot mechanism to prevent oil from scattering.
